Automatic sliding door kit

1) General characteristics of automatic sliding door kit :

(a) Suitable for both internal and external environments.

(b) Four operating options: fully automatic, half open, always open and always locked.

(c) The technical parameters can be adjusted to accommodate different conditions.

(d) Built-in microprocessor chip ensures the accuracy and precision of the operation.

(e) Automatically reverse back upon an obstacle.

(f) Safety beam protects the passengers from bumping the door, safe and reliable.

2) Technical specifications of automatic sliding door kit

3) Picture of automatic sliding door kit


4) Main components of automatic sliding door kit

The structure diagram of automatic sliding door kit

The detailed introduction of automatic sliding door kit:

What benefits can automatic doors bring? And why do most modern buildings adopt automatic doors? 

Automatic doors can not only beautify the inward and outward environment, but also has the functions of saving energy (air conditioning), de dusting, insulating noise, etc.

The comparison between automatic sliding door and automatic swing door:

At present, automatic sliding door has the highest utilization rate, it can be used for various entrances, but the whole system must be specially made as per actual need, and it has certain requirements and restrictions on the installation environment. Automatic swing door opens in the same way as what we use daily, and it can be installed on the basis of existing manually opened swing door, no need to make more changes to retrofit and upgrade itself, especially top-mounted swing door mechanism with the advantage of easy construction. So, it is convenient to install automatic swing door for either new construction project or renovation project. Due to the high requirements for manufacturing process and technical expertise, there are relatively fewer optional brands.

The comparison between framed glass door and frameless glass door

Frameless glass door has lower production cost and better permeability. Framed glass door has higher production cost, it looks more sedate, magnificent, safe and reliable. For small opening, it usually adopts frameless glass door, and for large opening, it usually adopts framed glass door. But for entrances with large wind, it is better to use framed glass doors.

When installing automatic doors, in case of the use of stainless steel for door frame outer facing, please make sure the stainless steel thickness is above 1.2mm, otherwise there will be varying light and dark plaques, which is quite ugly.

Automatic door ≠ glass door

Actually, automatic door can be made into all kinds of doors as we see in the daily life, just the current application of automatic doors is not very extensive, it is mainly used in the entrance of the building, which habitually uses glass door panel, so people mistakenly believe that automatic door is glass door.

In general, automatic door microwave sensor is common lintel-mounted sensor, but if your automatic door is installed on the ceiling, it will be perfect to install one pair of ceiling-mounted sensors accordingly. If it is a five-star hotel, choosing a pair of wide-range, high-sensitivity sensors matched with a safety beam sensor, not only provides customers with attentive service, but also ensures foolproof security. If the automatic door is close to the pavement (bank), choosing a narrow-range infrared sensor can completely avoid wrong opening caused by the passing pedestrians, so the selection of sensor has a great influence on the performance of automatic door.

Customers should choose professional company with great strength to install automatic door, otherwise it might be penny wise and pound foolish.

Customers must choose professional installation company with actual strength and rich experience for the construction, because automatic door installation has the characteristics of "easy to learn but difficult to master". Without extensive installation experience, there will be various problems during automatic door operation, it is usually difficult to eliminate, and also difficult to guarantee the perfect after-sales service.

The problem that cannot be ignored

The performance of the automatic door is affected by the operating environment. In the process of running, it is hard to avoid any problem which needs to be adjusted. In the course of daily use, there is often such a situation: no handling of small glitch turns into big fault, no handling of big fault turns into large maintenance project, the cost comes from small to big, which results in the paralysis of the entire automatic door system.